lcd-slp lcd touchscreen annunciator display gamewell-fci 12 clintonville road, northford, ct 06472-1610 usa ? tel: (203) 484-7161 ? fax: (203) 484-7118 specifications are for inform ation only, are not intended for installation purpos es, and are subject to change without notice. no responsibility is assumed by gamewell-fci for their use. ?2016 by honeywell international inc. all rights reserved. www.gamewell-fci.com 9021-60782 rev. e page 1 of 1 fdny: coa-#6162 mea s1869 signaling 7165-1703:0176 city of chicago approved class 1 reference certificate of compliance vma-45894-02c approved fm description the gamewell-fci, liquid crystal display, smart loop panel (lcd-slp) is a touchscreen annunciator display used with the s3 series and e3 series ? systems. the lcd-slp provides an easy-to-use, intuitive interface for the operator?s control. the 4.3? (10.92 cm) color touchscreen display shows the following: ? system status ? service modes ? event details the following identify the led indicators that display on the panel. ? ac (green) ? supervisory (yellow) ? fire alarm (red) ? trouble (yellow) ? hazard (blue) ? silenced (yellow) the five fully-programmable front panel switch/led combi- nations provide a direct access to perform the following tasks: ? device bypass ? lamp test ? enable/disable groups or devices the display features the following physical switches. ?menu ?system reset ? five programmable switches ?drift walk test installation the lcd-slp is adaptable for installation in the s3, e3 ? series or retrofit cabinets. fo r additional information, refer to the e3 series cabinets data sheet, p/n:9020-0649 ? s3 series cabinets - slp-bb basic system enclosure - s3bb-bb/s3bb-rb system enclosure ? e3 series ? cabinets - aa size cabinet (e3bb-baa, e3bb-raa) - a2 size cabinet (e3bb-ba2, e3bb-ra2) - a size flush cabinet (E3BB-FLUSH-LCD) - b-slim cabinet (e3bb-rbslim) - b size cabinet (e3bb-bb, e3bb-rb) - c size cabinet (e3bb-bc/incc, e3bb-rc/incc) - d size cabinet (e3bb-bd/incc, e3bb-rd/incc) ? retrofit cabinets - if600-retrofit - 7200-b-retrofit - 7200-c-retrofit specifications operating voltage: 24 vdc fwr operating current: 0.030 amp alarm current: 0.065 amp operating temperature: 32 to 120 f (0 to 49 c) relative humidity: 0 to 93%,non-condensing at 90 f (32 c) e3 series ? is a registered trademark of honeywell international inc. ul ? is a registered trademark of underwriter?s laboratories inc. features lcd-slp ? listed per ansi/ul ? standard 864 9th edition. ? ul listed and fm approved for pre-action/deluge and agent releasing. ? provides 4.3? (10.92 cm) color touchscreen display of system events. ? includes five custom function buttons with leds for direct access to system controls. ? offers the following installation options: - locally mounted in the s3 series panels. - remotely mounted in the e3 series, a2 cabinet or lcd flush enclosure. ? displays the following six led indicators: - alarm - hazard - trouble - nac silence - supervisory - ac power ? shows the hazard led to indicate gas, carbon monoxide or other toxic gases. ? both the e3 series (ili-mb-e3/ili95-mb-e3) and the s3 series (slp) support up to 15 lcd-slp displays via the rs-485 serial interface. ordering information part number description lcd-slp lcd touchscreen display unit e3bb-ba2 remote enclosure with inner door, black, one lcd slot e3bb-ra2 remote enclosure with inner door, red, one lcd slot E3BB-FLUSH-LCD remote flush mounting enclosure, black, lcd slot
|